Find a wooden floor that is starting to break and doesn’t look good? For those of you who have a dust allergy, you need to leave the sanding job to a professional. Learn more about Prix sablage de plancher. It’s time to repaint the wood with fresh paint. The floor will have a new appearance that you have never imagined before.
Repainting wooden floors gives you the opportunity to get a new color on the floor. Both natural colors and solid colors are the best choices for you.
Before starting to apply paint, the first thing you should do is to clean the old coat and sand. Beginners are often overwhelmed by the sanding process.
The sanding process or sanding is carried out to give the wood a smooth surface. In this process, usually using Sanding sealer material as a covering material for pores on the wood. The wood sanding process is usually carried out more than 1x depending on the hard and coarse level of the wood being processed.
Following are the steps taken by professionals in sanding your wood floors:
Remove the trim on the wall near the floor
Make sure all areas are sanded maximally, especially on the border of the floor with the wall. Usually there is a trim on the bottom attached made of wood. This part must be removed because it can hold the dust from sanding and the painting will not turn flat.
Removing the trim will avoid two problems namely uneven finishing and dust will build up. The result is of course the finishing will not be neat. Usually this trim is affixed with glue or nails so you need to be careful to remove it.
Remove pet stains
Water stains are easier to remove but less stained from pets. If you have animals, make sure which areas of the floor are frequently exposed to their droppings. Cleaning the area with special chemicals. The stain usually penetrates deep into the wood.
Preparing the wooden floor
Now that you have removed the trim and repaired the area affected by animal waste, it’s time to carefully prepare the wood floor. If there is an air vent on the bottom wall, cover it with plastic. This will reduce dust getting into the floor and littering the floor.
Remove any distracting furniture and make sure the room is completely empty of objects. If there are wall decorations, remove them or cover them with plastic. You don’t want dust to get on it.
Open the door and plan where you will sanding from. Make sure that there are no nails on the floor that come out as this can damage the sandpaper later.
Using a machine
Is a good choice and choose one that uses a belt.
This was chosen because it will have a strong biting ability to sand hard wood floors. The resulting sanding can be more even and smoother.
Clean before and after sanding again
In between the sandpaper changes, you should remove the sandpaper dust by using a fine vacuum cleaner for the floor to remove the dust.
Dust that is left on the surface of the wood will cause rough scratches, even deep enough on the wood surface. A fine vacuum cleaner will lift the dust between the wooden floors.
Examining the sanded floor
Maybe it’s finished sanding with all the changes of sandpaper and quite a long time. But are wooden floors smooth enough? You need to research once again which parts are smooth and not. You can research by paying attention to using lights.
Using a buffing machine that is commonly used for smoothing or polishing.
Movement of the buffer on the floor from one wall to another. You also don’t need to pay attention to wood grain or other factors. Here you just need to smooth it and pay attention if the wood surface is completely smooth.
